Hammock camping is one of the most comfortable camping methods. It is considered a comfortable and easy way to throw and safe while sleeping above the ground.
Going for a hammock camping trip is very nice. But it requires special requirements as you need to find two bases for two trees that are secured at a distance of a few meters. Trees need to be strong to carry the equipment and hammock camping without using trees is very difficult but not impossible.
In order to hang a hammock without using trees, you must make a tripod. And this is made using thick sticks brought from the forest.
If you find one tree, you can tie the other end of the swing to your car or truck, and you can use rocks to link the ends of the swing, or you can buy a swing holder that you can equip anywhere.
Ways to hang a hammock without trees
Before creating a tripod stand and using the columns, you must know what you need to prepare the swing from a swing stand or anchors. These things may be like you are doing a complex calculation, but these things are simple.
Each swing pole must bear half of your body weight. For example, if your weight is 80 pounds, then each strong pole must bear 40 pounds without collapsing, so you do not need a pole only, but you need to use a pole that has a strong, solid and stable base. It is well installed.
Some of the ways you need to hang a hammock without using trees are:
DIY Tripod Hammock Stand
You can create a tripod hammock stand by using bamboo or using a stick that you can find in wood, and you must bring a thick bar in order to be able to bear the weight of the body.
If you find only one tree, you can tie one end of the swing on this tree, and therefore you will prepare a tripod to link the other end, but if there are no suitable trees, you must prepare tripods that are connected to a top rod.
In order to get started with this, you must find suitable branches where the diameter should range between 3 to 4 inches. Cut them to 8 feet long and will need to use three legs on each side with one upper rod. It is a total of 7 pieces 8 feet long.
After you finish arranging the wooden legs, tie a group of 3 at one end using a rope that is anti-slip, and after you finish this, put the racks at an appropriate distance, according to the length of the swing.
You have to put and connect a rod at the top in both carriers, so it will be ready to hang a hammock. Also, put a rain fly on top if the weather is not good.
Use your car as an anchor
You can use your car or truck to install the hammock as it is the best support you can get while you are camping in the hammock.
Many people move off-road with trucks or cars that have four-wheel drive, which have a bed that is high enough to provide a suitable anchor point.
You must select an appropriate point on your car that can bear half your body weight, and you must stay away from the rearview mirror.
You must also stop the car near a pole or tree in order to create a fulcrum at an appropriate distance, in order to tie the end of the swing well and appropriate.
The hammock is linked by attaching one end of the hammock to the body of the car or truck so that it bears half the weight of the body, and attaching the other end of the hammock to a strong pole that bears half the weight of the other body.
Note: You must specify the connection point accurately so that there is no breakage and collapse as a result of a weak anchor such as the area under the door because you may damage the car and may fall and be injured.
Hammock Stands
Using the hammock stand is very extraordinary. It is considered one of the most convenient ways to feel comfortable and relax as it makes the whole world a friendly area of the hammock.
The hammock stand consists of long support bars that are placed parallel to the ground.
The bars are bent towards the top, where they must meet at an appropriate height while hanging the hammock. There may be hooks, rings, pulleys, or other devices at each end to secure the hammock.
There are different types of hammocks so, you should look for a suitable hammock holder for your outdoor adventures. There are some things that you should take into consideration:
- set up a hammock:
The hammock holder that you want to set up should not need skills or any special tools to set up the hammock.
- Portability:
Bring a lightweight hammock so that you can easily transport and carry it with your camping equipment.
- Strength and durability:
The holder that is used to prepare the swing must be powerful and durable, as it can bear the weight of your body in a comfortable shape and must not twist when entering and exiting.
- Rainfly ability:
If you don’t bring a hammock stand with raindrops, you should find one with an overhead rail so that you can attach a tarp on rainy days to keep it dry.
Rocks
If you can’t attach the hammock to the trees, you can use rocks as they are a great and perfect anchor system and you will find many camping sites in the Alps have big boulders and this makes the camping site cool.
Hanging the swing using rocks is very simple and easy.
In order to prepare the hammock on the rocks, you must be about 10 to 18 feet away, and the rock is large. So that it can bear the weight of the body. Now, look for at least 6 to 8 feet high stone.
Equipping a swing on the stones has many options. For example, choose very long pieces of webbing or tree belts to go around the rock and create anchor points.
Or use pieces of climbing equipment such as cams and nuts to anchor in the rocks, but if you use your climbing equipment, you must get good instructions in order to do it correctly and in order to avoid injury.
At Home Or The Backyard
There are several ways to prepare and prepare the swing at home, and we will mention these methods that you can try at home or in the backyard of a house.
- Posts/Poles
If there are no solid trees that you can use in the backyard in your house, you can use fence posts, which are considered robust and durable.
You can buy high-quality poles from any hardware store, and the diameter of the poles must be at least 5 inches. Their height should be between 6 to 8 feet to support your body weight while sleeping on the hammock.
You must choose an ideal location to affect the columns, so you must do the following:
- Dig two holes in the ground for the poles. Each hole should be 2 feet deep by 10 to 15 feet and be 4 to 6 inches long.
- Put each column in each hole and then backfill the holes with concrete. It is necessary to cover the columns using concrete in order to prevent them from falling under the load.
- Wait 12 hours for the concrete to set.
- Fix the J-hooks on each pole in order to act as fulcrums.
- Attach one end of the hammock to each pole while adjusting the tension in order to hang it perfectly.
- Buildings
While you are setting up the swing in your home, you can use the buildings as anchor points because the structures of the buildings such as columns, handrails and joists are great sites for the monument.
In this method, you must go to the hardware store to buy two hooks in the form of the letter J, especially when using a pole, then use the carabiners or chains of preparing and equipping the swing.
Drywalls are not strong enough to support your body weight. If you want to use your wall as an anchor, you will need to do a stud finder to find the tires that are behind the drywall. And if you could damage your house, you will put yourself at risk.
Use Portable Stands
If you want to hang a hammock and there is no tree, use the portable stands.
This option is much easier than some other options, where the portable stands are ready for use with the swings.
Most portable carriers are very lightweight as they are easily carried. You can put them in your camping bag to be ready for your trip.
Metal or wood portable stands are easy to assemble, as you can set up the hammock without the need to make a lot of effort.
In most cases, it consists of two frames that bend towards the top and are at a suitable height for the swing. In most cases, it comes with reels or hooks to secure the swing in a good position.
Read More: