Camping in the wilderness is extraordinary and enhances your experience in the wilderness and the outdoors. Unfortunately, in the fall and winter camping is uncomfortable due to the presence of rain, wind and water that may enter the inside of the tent. In this article, we will provide you with the best ways to keep your tent off the ground to avoid water and gravel on the ground and the best solutions for that.
How To Keep Your Tent Off The Ground
Tents are the best way to keep you dry and protected from the dangers of wildlife that may pose a threat to you and your family members, but if the tent is on the ground, it will get dirty, but we will give you some great tips that you can do to maintain the tent.
Choose The Ideal Place
When you are on a camping trip, the first thing you have to think about is to find the perfect place to pitch your tent and should check the area well and there are no rocks and gravels on the ground you are going to put the tent on, and you should also choose an area higher than the rest where there are many Trees at the top to protect you from direct rain.
Consider A Ground Tarp
Put your tent on the ground tarp. It will provide good insulation for the tent from rainwater and torrential rain. The tarp will stop rainwater from seeping into the tent. You will be able to get a good sleep during camping nights.
Set Up Ground Cover
After we know the best fabric that we can put on the ground in order to protect the tent from water, which is the ground tarp, you must know how to put the tarp correctly, in order to ensure the best protection and sustainability for the tent and to keep you warm and dry.
Also, you should put a tarpaulin under the tent, but you must make sure that the cloth covers the entire tent and does not stretch back, and if the cloth is stretched, it is possible that dew can flow into the tent, which leads to moisture inside the tent.
You can also put protection over the tent in order to protect the tent from wind and rain, and the life of the tent increases when the fabric is used well.
Use Footprint
Footprint is probably one of the favorite solutions of many people who go out camping, and Footprint is a floor paper that is placed between the tent and the ground and is available in a number of different sizes and shapes to suit all tents.
The Footprint is installed in the corners and is the first step when setting up the tent and many tents are available with the Footprint for the best insulation and protection of the tent, and a tarp can also be added after placing the Footprint for more insulation and protection from moisture and water.
Portable Tent Platform
Finally, the ideal solution of raising the tent above the ground and reach the best protection from moisture and water. Building a portable tent platform is a great option to keep the tent off the ground. There are also many benefits that the portable platform for the tent will provide you with, such as the absence of stones and gravel under the tents. In order to learn more about the benefits and methods of working a portable platform for the tent, read the article to the end.
Why Should You Make A Portable Tent Platform?
In many cases, the tent is set up and prepared on the ground, and this makes sleeping at night uncomfortable, due to the presence of a lot of rocks and hard objects, and this is due to the presence of uneven terrain.
Runoff may be a very annoying source, and you and your equipment may get wet while you sleep inside the tent, and some rips may also occur to your tent if you pitch it directly on the ground.
If you pitch your tent on the ground, some crawling animals may enter your tent. Therefore, you will wake up from sleep as a result of exposure to some sores resulting from insect bites, so you must make your tent raised from the ground.
How To Create A Platform For Your Tent?
In order to set up your tent far from the ground, there are some materials and some steps that you must follow:
Materials
In order to create your tent far from the ground, you will need some of the following materials:
- Bring 6 4″ x 8″ sheets of plywood and ½ inch plywood.
- Bring 10 to 12 feet and 2x4s for the joists.
- Bring 4 to 8 feet and 2x4s for the sides.
- Bring in 4 to 8 feet and 2x4s for the legs.
- Bring 6 to 12 inch belt hinges.
- Bring 3 to 9 inch utility hinges.
- Bring 3 to 4 inch butt hinges.
- Get 10 eye screws.
- Get 10 U-bolts.
- Bring 10 walnut tees.
- Bring 20 walnuts.
- Bring 20 insert nuts.
- Bring 20 1 inch washers.
- Get 20 flat head screws.
Building Guide
After you bring the previous materials, build your platform by following the following steps:
Step one: is to separate the frame
Create a platform deck by considering 2 to 8 feet and 2x4s and attach the 2x4s by using a heavy-duty ray 10 2x4s hinge to create 20 pieces and attach the 2×4 to the preferred strap to create 10 joists for the floor.
Step two: Build the legs
Bring 10 of the 2x4s and cut them to 10 inches Bring the 10 of the 2x4s and cut them to 13 inches. Attach the short sections to the larger sections using nails to create the legs.
Now! connect the legs to the platform by using a C-Clamp and then make a hole in each of the legs and the platform and then use the hammer nut in order to connect the two with each other.
Step Three: Create the floorboards
Create the panels that are on the platform by using a 3-inch tool to form the mounting panels and to hold the hinges in place more firmly, use short machine screws, six nuts and washers, and then apply varnish to the surface.
Step Four: out of the frame:
Frame the perimeter in order to form a triangle that measures 12 x 16 feet and then join the 2 x 4 corners together. You must also make sure that the hinges are well intertwined.
Step Five: Connect the legs
Install the tent platform using the legs that you made in step two. The legs should be 13 inches high. Then attach each leg to the platform using an eye bolt. You should also use the screws through the frame to the launch nuts that are on the part back of the legs.
Then tighten the screws using your hands as you will use these screws to install the tent well.
Step six: Install the U-shaped screws
In this step, you must install the U-shaped bolts, where these bolts increase the support and fix the ground joists by using the middle leg 2 x 4 where the leg is attached using the U-shaped bolts and using the wing nut where each. What you have to do is to insert the U-shaped screw into the holes using a hammer while tightening the nut using your hands.
Step Seven: is to secure the floor:
In this step, you must be able to use the platform, which is the lifter of your tent from the ground, in order to secure the floor area, so you must make a hole in the top of the 2 x 4 frame in each spiral place.
In order to insert the nuts into the hole, you must use an Allen wrench, where you must drill holes with a diameter of A¼ inch using plywood, and you must tighten all twenty screws well and tightly.
Read More:
[…] How To Keep Your Tent Off The Ground […]