Put a tarp over A tent to protect your tent from the rain while going on a camping trip.
You must be prepared for all kinds of weather while going on a camping trip as it can rain and rain on you while you are in your camp even if you bring a waterproof tent. Therefore, you should make an additional defence barrier because it will benefit you greatly, and this is the role of the tarpaulin, so it must be handy.
You can bring a spare trap at the ready and know how to prepare suitably. It will make all the difference when you want to enjoy your trip.
Benefits of Having a Tarp over your Tent
- Hemp is a multi-use material that you can use for multi-purposes. It contains many of the many distinctive benefits of these benefits:
- Helping in protecting your tent and shelter from the elements. A tarp provides a barrier between your tent and rain, wind, cold or bright sunshine, and helps keep your campsite cool or warm, depending on the weather.
- It increases the protected footprint of your campsite as it can provide you with a tarp over your tent or even an extension beyond the hatch in order for you to be able to sit, cook and have a campfire.
- It may be a great alternative to a tent as the tarp over your tent is a great tent for you if you break your tent wrong or forget to bring your tent it will give you some shelter when necessary.
- You can also put it under your tent, as if you put a tarpaulin under your tent, it will make the floor of your tent dry even if you are camping on wet ground.
Basic Tarp Configurations
Covers are significant while you go on a camping trip and are suitable for all kinds of situations where you can add some stakes and man lines. Thus, you can make yourself a shelter to protect yourself from the elements.
There are three tarp configurations that you can use on an average camping trip if you search for some comprehensive details. You can check out our complete guide to tarp shelter configurations.
Read More: The Perfect Guide To Camping For Beginners
The tarp compositions are:
Framework
It is considered one of the most common ways in which you will see anyone using a camping tarp because it is a simple method to use and is a very effective method.
In order to set up an A-frame tarp over your tent, you will need a lifting line or rope and stakes.
Thus, you will be able to prepare a traditional shelter in the form of a tent. It is ideal for rainy weather. You can also make an A-shaped shelter. Therefore, you can use it as a tent.
Lean-to Tarp
It is an A-frame tarp configuration that is cut in half.
In order to do this, you need a lift line, but only one side of the tarp goes to the ground while you fold the other over the ridgeline and it stays tight with the leg lines.
A lean tarp is so great that you can use it to protect the side of your tent with windows during rain.
Arrowhead Tarp
This formation is in the form of a triangle and is oriented towards the earth, hence the name.
It is unique and great for storing additional camping equipment, as you can benefit from it to save space in your tent.
In order to prepare it, you must bring three corner stakes of your tarp. And raise the fourth corner, and you can do this by tying it to a tree or by placing it on a tent pole or a trekking pole.
Useful Knots To Know
You have to learn some basic camping knots in order to properly prepare your tarp because if you ignore these basic knots. Your construction will fall as soon as you touch it or fall if exposed to a little breeze.
Some knots that you can use to appropriately prepare a tarp:
Bowline Knot
This knot is considered a classic as it is easy to tie and untie and does not slip or stick under load.
It is considered one of the best camping knots that you must know, so if you do not already know it, you must train it.
In order to set this knot, you will need a vertex line where when you wind the rope around the first tree, you will need to pass it through the loop that this knot makes. If you do this way, you won’t budge.
Taut-Line Hitch
In this method, wrap the rope around the first tree where the knot will be in the form of an arc. As for the other tree, you must know the obstacle of the tight line.
This method is characterized by being non-slip and adjustable, so you can make its provisions when needed.
You can also use this knot to connect the lines of tension with the stakes.
Prusik Hitch
Knots are known as slip knots and are very useful if you are using a tarp with ridgeline loops.
How To Put A Tarp Over A Tent
Before setting up your tarp
Before you start setting up a tarp on your tent, you will need some supplies and equipment in order to do so:
- Clear the camping site of stones and fallen branches from trees. It is best to choose a dry place for your tent.
- Take a quick look at the trees and poles you can use to put the trap on your tent. Make sure you choose the right strong trees and try to avoid dry, weak branches that can break easily.
- Make sure you have an ample amount of rope in order to tie the trap.
Keep in mind that you need a large tarpaulin, especially if you want to cover a tent that accommodates a large number of people compared to a tent for only two people, and for that, make sure to take an adequate amount of tarp with you during the camping trip.
Setting up your tarp
There are several forms and patterns for preparing and placing hemp on your tent. You can choose between, and this depends on what your camping requirements are. We will identify these forms together and how to do them together:
The A-Frame Style
The A-Frame style is one of the easiest and fastest patterns for setting up a tarp over a tent, and this style requires two trees or two poles to install the tarpon.
Necessary steps:
- Create a ridgeline, which is a line of rope tied between trees or columns.
- Throw the hemp over the ridgeline.
- Spread the tarp evenly on both sides of the ridgeline and make sure the wire runs along the middle of the tarp.
- Pull the corners of the tarp until it becomes taut, and then tie it well into the ground in order to fix it. sure
Be sure the tent is well-tightened to distribute the rain evenly and let the water flow on both sides so that rainwater does not occur.
In order to avoid this, create a drip line, which is a piece of rope tied to the ridgeline that diverts the water away from the bottom of the tarp which diverts from pooling water.
The Wedge Style
The Wedge Style is one of the best styles, especially for protection from wind, heavy rain and direct sunlight, and is ideal for cooking with a stove fire because it will protect it from wind and rainwater.
Necessary steps:
- Create a vertex line as mentioned earlier, and the ridgeline can be either high or low as needed.
- After you have created the vertex, throw a tarp over it and spread it over the vertex as we did in the previous pattern, but allow one side to have more fabric than the other.
- Pull the tarp from each corner until it is well tightened.
- After pulling the tarp, tie it to the ground in order to keep it in place.
The Wedge Style is a good option if you want protection, but the downside of this style is that you won’t get enough protection in all directions, especially when the wind changes direction, which leaves you quickly exposed.
The Arrow Head Style
The Arrow Head Style is one of the most used styles especially, when you want to store some supplies and tools in a place protected from rainwater, this shape can be a small shelter if needed.
It’s a leisurely style and perfect when you don’t have enough rope.
Necessary steps:
- Create a vertex line using two trees or two columns. The line will extend along the entrance.
- Throw a corner of the tarp across the ridgeline.
- Firmly fix the opposite corner to the ground.
- Pull the other corner of the fabric until it becomes taut and tie it well to the ground in order to hold it in place.
- If the previous steps are done correctly, the fabric should take the shape of an arrowhead.
The Teepee Style
This pattern requires rehearsing how to set it up several times in order to master it. It is the most difficult of all but can provide much more shelter than the previous patterns.
Necessary steps:
- Put a pole in the middle of the place where you want the tent to be, and a small tree can be used for this, but you must make sure that the trunk is thin enough.
- Tie one end of your rope to the top of the pole or tree branch you want to use, and then secure the other end of the cord to the ground.
- Make sure the rope is tight enough. Make sure you have enough cords to tie the top well.
- Fold the tarp over the ropes all the way, and use the cords to hold it in place properly
And you can use cloth instead of a tarp in building this pattern.
Read More: