How to use the Compass on iPhone
Reading Time: 5 minutes The compass is one of the important things to take with you on camping trips, but today, with the development of technology and smartphones, you can partly dispense with them. You can use these phones as guidance devices and there are many applications such as digital compass applications.
The developers of Apple have developed an accurate Compass on iPhone for their smart devices, and this application works on the optical imaging of the compass, which allows the user to easily navigate the terrain and determine directions and not get lost in the wilderness, and this compass helps you determine directions and geographical information about the places you are in.
But we have to remind you that the electronic compass on iPhone will not replace the traditional compass, for several technical reasons, the most important of which is the magnetic fields of the phones, which may sometimes affect the readings.
How to set up and calibrate the Compass on iPhone
The compass on iPhone is a default application that is loaded when the company’s system is loaded, and it is located on the home screen of the phone, but before you start using the application, you need to set up the compass application on the iPhone and to create the calibration, you must follow the following steps:
- Click on the app to open it.
- Move the iPhone in the air while creating a circle until the circular scale turns completely white, and in the old versions of the compass on iPhone, you had to draw an infinity mark in the air with the iPhone for calibration.
- After completing the manual calibration of the application, the application will display the magnetic north in the settings of the iPhone. You can set up to display the geographical north by going to the settings and scrolling down to the compass menu. Adjust the slider for true north and make it active.
- After completing the previous steps, you can now fully enjoy the application, as it will display degrees of direction and directions of length and width, using GPS technology in iPhone devices.
The most important feature of the application is the display of the main points on the screen in large letters. If you want to determine the direction of the north, turn the compass until the red arrow coincides with the letter N with the white line.
Also, one of the great features of the application is the ability to set directions. When the user needs to specify a special direction, the user moves the iPhone in the specified direction and clicks on the screen. The iPhone will save the direction in order to modify it in case the direction is forgotten.
How to use the Compass on iPhone
As we mentioned previously, the compass on iPhone is one of the best applications designed for this work. And it can smoothly determine the location of the north in order to start your movement correctly.
To correctly determine the indicator for the application, it is necessary, after downloading the application, to implement some settings and steps in order to make the most of the application:
- Place the tool on the map of the area you want to go to.
- The right part must be located so that it connects two areas so that you place where you will start the journey and where you want to reach.
- Rotate the map of the area you are in so that the arrow is pointing north.
- After doing these steps, you will find at the bottom of the iPhone the detected direction in order to start the journey.
Read More: The Perfect Guide To Camping For Beginners
How to switch to true north in the Compass app for iPhone
While you are moving from one place to another, you can use True North or use Magnetic North by using your iPhone if you have experience in this matter and in order to determine the place you want to move to use this method, follow the steps the following are:
- Insert the compass on iPhone by using the home screen.
- Select the compass.
- Then by clicking on the radio button next to True North.
- The barrier should be completely flat because the compass app used on your iPhone is a bit tricky to use.
If you tilt the phone and the screen is parallel to your face, you may get a vertical plane, but if you hold the iPhone in the palm of your hand, you will see white bubbles in the black number. Therefore, you will get the horizontal plane.
How to use the level in the Compass app on iPhone
Using the Compass app on your iPhone is tricky, especially if you’re fighting a bunch of zombies while trying to build a barrier to keep them out. This barrier should be completely level.
In order to use the Compass application correctly, you must follow the following steps:
- Launch the compass on iPhone from your home screen
- Swipe to the left on the face of the compass. If you hold your iPhone flat using the palm of your hand, you will see white bubbles around the number that is in black. Therefore, you will get a horizontal level. If you tilt the phone and the device screen is parallel to your face, you will get on the vertical level.
Let’s start with the horizontal plane:
- Lay your iPhone flat. So, it is flat against the surface you are using for levelling.
- Make your iPhone tilted so that it is in all directions in order for it to reach a temperature of 0 degrees. So, the screen will turn green.
- You can turn the black screen to red by doing a single tap. It will stay like this until your iPhone becomes flat and turn green.
Vertical level:
- Hold your iPhone upright against the object you want to equalize.
- Make your iPhone tilted so that it is pointed in all directions in order for the temperature to reach 0 degrees. Thus, the lower half of the screen will turn green.
- If you want to take another measurement from the same angle, you have to click on the level once. So, you will see the red colour as you move away from the angle you were in. You can measure a 90-degree angle and a 45-degree angle in the same way.
Read More:
